Don't Drop The Bass! Mac OS

FOR WINDOWS & MAC

• Don't Drop The Bass Mac Os Catalina
• Drop The Bass Vine
• Don't Drop The Bass Mac Os Download

MIDI Guitar turns any guitar into a true polyphonic MIDI Guitar, with latency and accuracy comparable to expensive and inconvenient hardware MIDI-Guitar solutions. This is achieved by connecting your guitar to your computer and letting MIDI Guitar use its polyphonic (multi-note) pitch detection algorithm to convert your guitars signal to MIDI that can be used to play a soft synth or virtual instrument or as a plugin in your Digital Audio Workstation

MIDI Guitar is available as both a VST/Audio Unit plugin, but also a standalone application that can transfer MIDI to your Digital Audio Workstation using Virtual MIDI on Mac OS X and a virtual MIDI cable driver on Windows.

AmpliTube can work as a 64-bit plug-in for the most popular DAW (such as Pro Tools, Logic, GarageBand, Cubase, Live, Reaper) or can be used in stand-alone mode in Mac OS X and Windows. The plug-in and standalone versions offer the same function and sound, but the standalone version also offers a built-in 8-track recorder and DAW, plus a 4-track. Select your chosen device from the Audio Device drop-down menu under the (Mac OS X: Select your chosen device from the Audio Device drop-down menu under the Studio One/Options/Audio Setup (Mac OS X: Preferences/Audio Setup) menu. Some devices offer a selection of configuration options. If your connected device has those controls, you can click.

The free trial of MIDI Guitar allows you to evaluate the recognition technology without any interruptions when using the Test Piano and with interruptions when hosting plugins or using MIDI output.

How do I install MIDI Guitar?
How do I buy and activate the license?
How to use in your DAW

Ableton Live

Ableton Live 9

IMPORTANT: if you installed the VST, but it doesn't show up in Live, try the following:
1) goto Live / Preferences / Plugins
2) Hit 'rescan' with the 'alt' key pressed. This will force Live to evaluate all plugins.

Here is another video that shows the basics of using MIDI Guitar as a plugin in Ableton Live 9, but is also slightly misleading. Please see the comment below.

In this video, the MIDI Guitar 2 AudioUnit is loaded and it outputs MIDI with the V-MIDI option, which works, but cause a latency overhead. Please don't use the AudioUnit with Ableton. Instead, load the MIDI Guitar 2 VST plugin and use the direct midi output (which is enabled by default). In your MIDI/instrument track, go to 'MIDI From' and select the audio track on which the MIDI Guitar VST is loaded. Now, when recording, you get MIDI into the piano roll of that MIDI track.

Ableton Live 8

1. In Preferences / Audio, check that Audio Input Device and Audio Output Device are correct.
2. In Preferences / Audio, check that In/Out Sample Rate is 44100
3. In Preferences / Audio, check that Buffer Size is 256 or 128 samples
4. In Preferences / File Folder, set 'Use VST Plug-in System Folders' to Yes on Mac OS X and make sure the MIDI Guitar VST is found on Windows.
5. Press Tab key to access Arrangement View
6. Check menu 'options'. Latency compensation should be OFF!
7. Click 'I-O' button to show In/Out section
8. Click 'M' button to show Mixer section
9. Make sure you have an Audio Track named '1 Audio' and a MIDI track named '2 MIDI'
10. Add MIDI Guitar VST to '1 Audio' track
11. Click 'In' button on the '1 Audio track' to verify that MIDI Guitar works with your audio interface.
12. Select '1 Audio' as 'Input Type' for '2 MIDI' track to redirect MIDI from MIDI Guitar to your MIDI track.
13. Arm recording for '2 MIDI' track to record MIDI from MIDI Guitar.
14. Click Record and then Play to start recording MIDI from MIDI Guitar.

Acoustica MIxcraft (not compatible)

Mixcraft (windows only app) does not support standard midirouting and therefore does not work with our plugin out of the box. Workarounds are theoretically possible but not for the faint of heart!

Apple GarageBand

Video tutorial for GarageBand:

Apple Logic Pro X

Apple Logic Pro X

Logic does not support routing MIDI out of AudioUnit plugins, but virtual midi works to get MIDI into Logic and is simple to setup. First, make sure you apply Logic's low latency mode.

Recommended setup:

The best way to use MG with Logic is using the MG AudioUnit (customers only):

1. Make sure you place the MIDI Guitar 2.component in your plugins folder (typically thats /Library/audio/plugins/Components/) as described above.
2. Restart your computer so that Logic Pro will scan the new files you have installed.
3. Next, open Logic Pro on your Mac and create two tracks… The first track should be an 'audio track' for the audio from your guitar. On the channel fader of this 'first' track, activate Midi Guitar 2 in the audio FX slot. Make sure you don't use any other effects before MIDI Guitar (as MIDI Guitar needs a completely dry input).
4. Now, create a second track. This new 'second' track should be an 'instrument track' for the 'midi information' that will automatically come from the Midi Guitar 2 plugin on the first guitar track you created… These two tracks will work together!
   On the second track you created, do not call up Midi Guitar 2 in the channel fader slots.
   When you create an 'instrument track' in Logic Pro, it automatically installs an instrument in a midi instrument slot… That is the instrument that will be activated and played by the midi information recorded on the track. you can of course change it to any instrument.

The following video shows how to use MG in Logic Pro X

This video shows how to use both internal sounds and midi in a simple studio setup:

Using only the MIDI Guitar standalone:

• Instead of using the MIDI Guitar Audio Unit, you can simply run the MIDI Guitar standalone and select the MIDI Output Route: 'MIDI Guitar Virtual MIDI Out'. Now 'MIDI Guitar' appears in Logic as a MIDI input without any additional work. That's it. It's just there. This method will add a bit of latency compared to recommended approach described above.

Apple Mainstage 3

Ardour

If the buffersize in Ardour is set to 256, the usage of our MIDI Guitar VST is very straightforward.

We still need to add a quickstart vid here.

AVID ProTools (only via extra bridging plugin and midi loopback)

AVID ProTools

Since ProTools does not support VST or AU plugins you need to use MIDI Guitar standalone and a virtual midi driver. The idea is that you connect MIDI Guitar to ProTools though a virtual cable (in much the same way you would connect a physical midi keyboard controller though its software driver). Its fairly simple:

1. If you are using Windows you need a virtual midi loop driver, such as loopMidi or loopBe1 (both freeware). Mac users can skip this step as Apple operating systems already include a virtual midi standard.

2. Make sure MIDI Guitar works in standalone mode, i.e. you can play the Test Piano.

3. In MIDI Guitar select the virtual midi loop driver as MIDI Output (bottom left). On Windows that is a loopMidi/loopBe1 device. On Mac its the 'MIDI Guitar Virtual MIDI Out'.

4. In ProTools, enable the same device as input. (Setup > MIDI >Input Devices > Check the box next to the MIDI Guitar loop output). Mac users just select the built in 'MIDI Guitar Virtual MIDI Out'.

5. Thats it. Your guitar is now connected to ProTools, just like a midi keyboard.

Note that virtual midi is not ideal in terms of latency, although usually the impact is unnoticeable. We will consider an AAX plugin in the future.

Note for Windows users: Since most ASIO drivers only works with one application at a time you might also need a second interface.

Using BlueCat VST wrapper ( this works only on macOS)

As an alternative to the above, you can use the BlueCat VST wrapper.
You have to load the MIDI Guitar AU audio unit: that plugin will create a virtual midi port.

Bitwig Becalm mac os.

Our plugins work in Bitwig, and the MIDI is routable from our plugin to other tracks.
there is a quirk however with getting Bitwig to be able to record the MIDI onto a pianoroll.
We contacted Bitwig but still havent got an answer yet

Cakewalk by Bandlab

Cakewalk Sonar

Starting with Sonar X3 and any newer versions works great with MIDI Guitar:

1. Copy the MIDI Guitar plug-in to the VST folder
2. Launch SONAR. If the plug-in is no listed in the Audio FX list, run the VST scanner.
3. Create or open a project.
4. Add new audio track, set the input to a mono source (or use an existing mono track). Insert MIDI Guitar into FX bin or ProChannel. To record MIDI data from MIDI Guitar MIDI, using the VST2 drop down in the plug-in header click 'Enable MIDI Output' otherwise load a synth plug-in directly into the instrument output of MIDI Guitar, enable input echo on and skip step 5.
5. Add a new synh or change the input to an existing synth to MIDI Guitar. Make sure both the MIDI Guitar audio track and the synth (Instrument or MIDI) track have input echo enabled.

Old versions of Sonar:

In older versions of Sonar (version X1, X2) there are issues with MIDI Guitar. The Sonar addressed these issues in version X3, but some have found a workaround for old versions Sonar that apparently works in X1 and X2.

( Quoted from MoreK at KVR Forum: RE Sonar X2 & MIDI Guitar )

What I missed was the MIDI Guitar pop-up menu in the Synth rack. Clicking the keyboard icon with right mouse button gives a menu with no 'Enable MIDI Output' option. You have to click grey area of the synth and you'll get a different menu with the MIDI output option.

So, to summarize the whole setup:

1. Copy VST plugin to your VST folder
2. Launch Sonar. It should automatically recognize the new plug-in and create needed registry entries (ie you should see the plug-in as an effect in Audio FX menu). If not, use Plug-in Manager to scan new plug-ins.
3. Use Cakewalk Plug-in Manager, find MIDI Guitar in Effects section and open 'Plug-in Properties'. Enable 'Configure as synth' option.
4. Close Sonar and use Regedit to change generateEvents key from '0' to '1' in HKEY_CURRENT_USERSoftwareCakewalk Music SoftwareSONAR ProducerCakewalk VST X64Inventory -> MIDI Guitar
5. Launch Sonar. Add new audio track. Insert MIDI Guitar (now found in Soft Synths menu) to FX bin.
6. Go to Synth rack view. Right click grey area of the MIDI Guitar synth block and click 'Enable MIDI Output'.

That's it. Add your favourite synth to a new track and route MIDI input from MIDI Guitar, which should be visible in MIDI input menu.

Thanks again, works like a charm now.

Cockos Reaper

Cockos Reaper

Reaper 5.2

Reaper 4.2

Add MIDI Guitar as a FX plugin and click on the record field and select 'Record: Output' and then 'Record: MIDI Ouput'

Steinberg Cubase

Steinberg Cubase 11

Please see this page.

Steinberg Cubase 9 & 10

Windows users:
Please deactivate/uncheck the 'ASIOguard' in Cubase audio settings!!
For further helpseeCubase 8 video

Steinberg Cubase 8

Cubase 7

Add an audio track and an instrument/MIDI track. Add MIDI Guitar as an Effect plugin to the Audio track and select MIDI Guitar as input on the Instrument/MIDI track

FL Studio 20 (unconfirmed performance)

FL Studio 20

. is available for both windows and macos now!
The internal routing allows for connecting the loaded MIDI Guitar plugin to purchased FL synths and none-FL synths.
Note 1: MIDI Guitar is not made with variable buffersize in mind. The display of buffersize and cpu load are erratic.
Note 2: as for now, we dont really know how well it works latency and stabilitywise. It may be so that the standalone/virtual midi is more stable, especially on macos.

FL Studio (before version 20)

You have two options:

1. You can use the MIDI Guitar VST plugin inside FL Studio. This is optimal in terms of latency but unfortunately FL Studio does not currently support routing midi from VST plugins to its piano roll. Thus, you will be limited to hosting synths and instruments inside MIDI Guitars internal plugin host.
If using this option you need to make sure FL process audio in fixed size buffers. Please see the FL docs: http://www.image-line.com/support/FLHelp/html/plugins/wrapper_2_processing.htm

2. The other option is to use a virtual midi loop and the MIDI Guitar standalone. This is detailed below.

Install loopMIDI. Start loopMIDI and add a MIDI port.

In FL Studio MIDI Settings, Enable the loopMIDI Input MIDI device and set the loopMIDI Output MIDI device port number to 0

In the Mixer add MIDI Guitar plugin to an available channel other than Master. In MIDI Guitar plugin settings set MIDI Output port to 0. In the step sequencer select and enable a synth such a DX10.

MOTU Digital Performer

MOTU Digital Performer 8 & 9

1. In Preferences / Audio Plugins, make sure MIDI Guitar VST is enabled.
2. In Setup / Configure Audio System / Configure Hardware Driver, check that Master Device is correct.
3. In Setup / Configure Audio System / Configure Hardware Driver, check that Sample Rate is 44100
4. In Setup / Configure Audio System / Configure Hardware Driver, check that Buffer Size is 256 or 128
5. In Setup / Configure Audio System / Input Monitoring Mode, make sure that 'Monitor record-enabled tracks through effects' is selected.
6. Select Sequence tab
7. Add a Audio Track
8. Select Audio Input for the Audio Track.
9. Enable Input Monitor and Record for the audio track.
10. Select Mixing Board tab
11. Add MIDI Guitar VST to audio track.
    In MIDI Guitar, set Patch to 'Test Piano' and strum your guitar to test MIDI Guitar.
12. Select Sequence tab.
13. Add a MIDI track
14. Arm MIDI track for recording
15. Click record.

Magix Samplitude

Magix Samplitude

Very nice video introduction to MIDI Guitar using Samplitude by Kraznet.

Propellerhead Reason

See this forum thread.

Propellerhead Reason 11.2

Propellerhead Reason 10

From Reason 9.5 on, VST plugins are supported, but the midi output from a VST is still not routed in Reason 10.

Propellerhead Reason 9.5

From Reason 9.5 on, VST plugins are supported, but the midi output from a VST is not routed yet.
We've notified Propellerhead of this, hopefully they add the functionality soon. You still need the use the standalone via virtual midi route now.
https://www.propellerheads.se/reason-95

Propellerhead Reason below 9.5

Since Reason does not support VST or AU plugins you need to use MIDI Guitar standalone and a virtual midi driver. Its fairly simple:

1. First make sure MIDI Guitar works in standalone mode. If you are using Windows you need to install a virtual midi loop driver (such as loopMidi or loopBe1, both freeware). Select the virtual midi driver as output route in MIDI Guitar. Mac users simply select the MIDI output route: 'MIDI Guitar Virtual MIDI Out'.

2. In Reason you must register the virtual MIDI driver as a MIDI Control Keyboard/surface. See the image below.

Note that virtual midi is not ideal in terms of latency. We do not know yet if there is has any real impact or not on latency. We will consider Reason Rack Extension in the future.

PreSonus Studio One

Studio One Professional
IMPORTANT:
turn down dropout protection under Options->Audio Setup->DropoutProtection.
It cannot be set to maximum. Any other setting should be okay.

Studio One Prime

This free version of Studio One does not support VST plugins.

You can still use MIDI Guitar with it, using a virtual midi loop connection. On Mac its built in. On Windows you need loopMidi (freeware). Then select the virtual device as output route in MG and input in Sutiod One Prime.

Studio One Artist

You can still use MIDI Guitar with it, using a virtual midi loop connection. On Mac its built in. On Windows you need loopMidi (freeware). Then select the virtual device as output route in MG and input in Sutiod One Prime.

Older versions of Studio One

Makes sure your samplerate is set to 44.1Khz and buffersize 256 or 128 samples.

Add track 1 (mono audio). Arm it for recording so you have your guitar here. Add the MIDI Guitar VST to this track. Adjust sensitivity.

Add track 2 (instrument track). Change instrument input to 'MIDI Guitar', 'CH1'. Arm it for recording so you have your guitar MIDI here.

Record audio and midi by pressing record.

Sensomusic Usine

Sensomusic Usine

Video introduction to MIDI Guitar using Usine by Nay-Seven.

Traktion 7

Compatibility with popular DAWs

Cakewalk Sonar

Starting with Sonar X3 and any newer versions works great with MIDI Guitar:

1. Copy the MIDI Guitar plug-in to the VST folder
2. Launch SONAR. If the plug-in is no listed in the Audio FX list, run the VST scanner.
3. Create or open a project.
4. Add new audio track, set the input to a mono source (or use an existing mono track). Insert MIDI Guitar into FX bin or ProChannel. To record MIDI data from MIDI Guitar MIDI, using the VST2 drop down in the plug-in header click 'Enable MIDI Output' otherwise load a synth plug-in directly into the instrument output of MIDI Guitar, enable input echo on and skip step 5.
5. Add a new synh or change the input to an existing synth to MIDI Guitar. Make sure both the MIDI Guitar audio track and the synth (Instrument or MIDI) track have input echo enabled.

Old versions of Sonar:

In older versions of Sonar (version X1, X2) there are issues with MIDI Guitar. The Sonar addressed these issues in version X3, but some have found a workaround for old versions Sonar that apparently works in X1 and X2.

( Quoted from MoreK at KVR Forum: RE Sonar X2 & MIDI Guitar )

What I missed was the MIDI Guitar pop-up menu in the Synth rack. Clicking the keyboard icon with right mouse button gives a menu with no 'Enable MIDI Output' option. You have to click grey area of the synth and you'll get a different menu with the MIDI output option.

So, to summarize the whole setup:

1. Copy VST plugin to your VST folder
2. Launch Sonar. It should automatically recognize the new plug-in and create needed registry entries (ie you should see the plug-in as an effect in Audio FX menu). If not, use Plug-in Manager to scan new plug-ins.
3. Use Cakewalk Plug-in Manager, find MIDI Guitar in Effects section and open 'Plug-in Properties'. Enable 'Configure as synth' option.
4. Close Sonar and use Regedit to change generateEvents key from '0' to '1' in HKEY_CURRENT_USERSoftwareCakewalk Music SoftwareSONAR ProducerCakewalk VST X64Inventory -> MIDI Guitar
5. Launch Sonar. Add new audio track. Insert MIDI Guitar (now found in Soft Synths menu) to FX bin.
6. Go to Synth rack view. Right click grey area of the MIDI Guitar synth block and click 'Enable MIDI Output'.

That's it. Add your favourite synth to a new track and route MIDI input from MIDI Guitar, which should be visible in MIDI input menu.

Thanks again, works like a charm now.

Cockos Reaper

Cockos Reaper

Reaper 5.2

Reaper 4.2

Add MIDI Guitar as a FX plugin and click on the record field and select 'Record: Output' and then 'Record: MIDI Ouput'

Steinberg Cubase

Steinberg Cubase 11

Please see this page.

Steinberg Cubase 9 & 10

Windows users:
Please deactivate/uncheck the 'ASIOguard' in Cubase audio settings!!
For further helpseeCubase 8 video

Steinberg Cubase 8

Cubase 7

Add an audio track and an instrument/MIDI track. Add MIDI Guitar as an Effect plugin to the Audio track and select MIDI Guitar as input on the Instrument/MIDI track

FL Studio 20 (unconfirmed performance)

FL Studio 20

. is available for both windows and macos now!
The internal routing allows for connecting the loaded MIDI Guitar plugin to purchased FL synths and none-FL synths.
Note 1: MIDI Guitar is not made with variable buffersize in mind. The display of buffersize and cpu load are erratic.
Note 2: as for now, we dont really know how well it works latency and stabilitywise. It may be so that the standalone/virtual midi is more stable, especially on macos.

FL Studio (before version 20)

You have two options:

1. You can use the MIDI Guitar VST plugin inside FL Studio. This is optimal in terms of latency but unfortunately FL Studio does not currently support routing midi from VST plugins to its piano roll. Thus, you will be limited to hosting synths and instruments inside MIDI Guitars internal plugin host.
If using this option you need to make sure FL process audio in fixed size buffers. Please see the FL docs: http://www.image-line.com/support/FLHelp/html/plugins/wrapper_2_processing.htm

2. The other option is to use a virtual midi loop and the MIDI Guitar standalone. This is detailed below.

Install loopMIDI. Start loopMIDI and add a MIDI port.

In FL Studio MIDI Settings, Enable the loopMIDI Input MIDI device and set the loopMIDI Output MIDI device port number to 0

In the Mixer add MIDI Guitar plugin to an available channel other than Master. In MIDI Guitar plugin settings set MIDI Output port to 0. In the step sequencer select and enable a synth such a DX10.

MOTU Digital Performer

MOTU Digital Performer 8 & 9

1. In Preferences / Audio Plugins, make sure MIDI Guitar VST is enabled.
2. In Setup / Configure Audio System / Configure Hardware Driver, check that Master Device is correct.
3. In Setup / Configure Audio System / Configure Hardware Driver, check that Sample Rate is 44100
4. In Setup / Configure Audio System / Configure Hardware Driver, check that Buffer Size is 256 or 128
5. In Setup / Configure Audio System / Input Monitoring Mode, make sure that 'Monitor record-enabled tracks through effects' is selected.
6. Select Sequence tab
7. Add a Audio Track
8. Select Audio Input for the Audio Track.
9. Enable Input Monitor and Record for the audio track.
10. Select Mixing Board tab
11. Add MIDI Guitar VST to audio track.
    In MIDI Guitar, set Patch to 'Test Piano' and strum your guitar to test MIDI Guitar.
12. Select Sequence tab.
13. Add a MIDI track
14. Arm MIDI track for recording
15. Click record.

Magix Samplitude

Magix Samplitude

Very nice video introduction to MIDI Guitar using Samplitude by Kraznet.

Propellerhead Reason

See this forum thread.

Propellerhead Reason 11.2

Propellerhead Reason 10

From Reason 9.5 on, VST plugins are supported, but the midi output from a VST is still not routed in Reason 10.

Propellerhead Reason 9.5

From Reason 9.5 on, VST plugins are supported, but the midi output from a VST is not routed yet.
We've notified Propellerhead of this, hopefully they add the functionality soon. You still need the use the standalone via virtual midi route now.
https://www.propellerheads.se/reason-95

Propellerhead Reason below 9.5

Since Reason does not support VST or AU plugins you need to use MIDI Guitar standalone and a virtual midi driver. Its fairly simple:

1. First make sure MIDI Guitar works in standalone mode. If you are using Windows you need to install a virtual midi loop driver (such as loopMidi or loopBe1, both freeware). Select the virtual midi driver as output route in MIDI Guitar. Mac users simply select the MIDI output route: 'MIDI Guitar Virtual MIDI Out'.

2. In Reason you must register the virtual MIDI driver as a MIDI Control Keyboard/surface. See the image below.

Note that virtual midi is not ideal in terms of latency. We do not know yet if there is has any real impact or not on latency. We will consider Reason Rack Extension in the future.

PreSonus Studio One

Studio One Professional
IMPORTANT:
turn down dropout protection under Options->Audio Setup->DropoutProtection.
It cannot be set to maximum. Any other setting should be okay.

Studio One Prime

This free version of Studio One does not support VST plugins.

You can still use MIDI Guitar with it, using a virtual midi loop connection. On Mac its built in. On Windows you need loopMidi (freeware). Then select the virtual device as output route in MG and input in Sutiod One Prime.

Studio One Artist

You can still use MIDI Guitar with it, using a virtual midi loop connection. On Mac its built in. On Windows you need loopMidi (freeware). Then select the virtual device as output route in MG and input in Sutiod One Prime.

Older versions of Studio One

Makes sure your samplerate is set to 44.1Khz and buffersize 256 or 128 samples.

Add track 1 (mono audio). Arm it for recording so you have your guitar here. Add the MIDI Guitar VST to this track. Adjust sensitivity.

Add track 2 (instrument track). Change instrument input to 'MIDI Guitar', 'CH1'. Arm it for recording so you have your guitar MIDI here.

Record audio and midi by pressing record.

Sensomusic Usine

Sensomusic Usine

Video introduction to MIDI Guitar using Usine by Nay-Seven.

Traktion 7

Compatibility with popular DAWs

Please find guides for each DAW above.

* On Windows it requires a virtual midi driver such as the free loopMIDI

Recommended DAW settings

Its recommended you run your DAW at 44100Hz using 128 or 256 samples pr audio buffer. Its important to understand that running at too high samplerates will cause latency and unresponsive tracking.

MIDI Guitar should work fine at high samplerates as well (88.2K, 96K, 192K, etc.), but it will cause additional CPU load and have no quality benefits as for MG concerned.

Processing old recordings

MIDI Guitar will generally process anyting on a track in a DAW, and this can be used to process old recordings in you DAW, in the same was as it can be used on live tracks, as long as those tracks are dry guitar recordings.

This means you can convert dry guitar audio recordings to MIDI, and have endless creative use cases. For inspiration please see this video:

Make sure that your devices are on and nearby

Check that your AirPlay-compatible devices are on. If your Apple TV is in Sleep mode and uses Ethernet, wake your Apple TV with the remote.

Don't Drop The Bass Mac Os Catalina

Make sure that your AirPlay-compatible device is near the device that you're trying to stream from. If you can't connect to an AirPlay device, try moving closer to it and try again.

To stream audio to multiple speakers with AirPlay 2, make sure that your speakers are compatible with AirPlay 2.

Restart your devices

Restart the devices that you want to use with AirPlay or screen mirroring. Learn how to restart:

• iPhone, iPad, or iPod touch
• HomePod*

Check for updates

Make sure that all of your devices are compatible with AirPlay and updated to the latest software version. Learn how to check for updates on:

Drop The Bass Vine

• HomePod*
• Smart TVs
  

Connect your devices to the same Wi-Fi network

• iPhone, iPad, or iPod touch: Go to Settings > Wi-Fi. Also, make sure that Bluetooth is turned on.
• Apple TV: Go to Settings > Network. If your Apple TV uses Ethernet, check that the cable is plugged into the router that you use for Wi-Fi.
• Mac: Click in the menu bar.
• HomePod:* HomePod uses the same Wi-Fi network as the iOS device it was set up with. If your iOS device is in range of HomePod and connected to a different Wi-Fi network, HomePod will show an alert in the Home app that says 'Wi-Fi Network.' To connect HomePod to the same Wi-Fi network as your iOS device, open the Home app, press and hold HomePod, tap Settings, then tap 'Move HomePod to [Wi-Fi network]' at the top of the screen.
• Third-party AirPlay-compatible speakers and Smart TVs: Go to the manufacturer's website to learn how to connect them to your Wi-Fi network.

Check your AirPlay settings

If you can't AirPlay to an Apple TV or HomePod,* check the AirPlay settings for that device.

• On Apple TV, you might have restricted who can AirPlay.
• On HomePod,* you might have restricted speaker access.
• For AirPlay 2, you might need to invite others to control your home so they can AirPlay to your devices.

If you're using a Mac or PC, you can't AirPlay to HomePod* if you select Only People Sharing This Home.

Still need help?

If you have another issue using AirPlay, learn what to do.

If your music unexpectedly stops

Don't Drop The Bass Mac Os Download

If your music stops playing unexpectedly, use your device or Siri to start playing music again. In some situations, the Home app might be using your HomePod,* Apple TV, or AirPlay-compatible speaker as the main audio source for streaming music (even if your HomePod* or Apple TV isn't currently playing music). Using Siri on that device or performing another task might cause playback to stop everywhere. You can also use an iOS device or computer with iTunes as an audio source to manually stream music instead.

If you see video but don't hear audio

If you don't hear audio when streaming video from your iOS device or Mac to your Apple TV, make sure that the volume is turned up and not muted on both your iOS device and your television or receiver.

If you're streaming video from an iPhone or iPad, check the Ring/Silent switch. If it's set to silent, you'll see an orange line. Toggle the switch to turn on the ringer.

If your content gets interrupted or your network lags

If you have a weak Wi-Fi signal or interference from a nearby device, like a microwave or baby monitor, try the following:

• Make sure that you use the recommended settings for your Wi-Fi router.
• Move or turn off other devices that might cause interference.
• If you're trying to AirPlay to Apple TV, try connecting your Apple TV directly to your router with an Ethernet cable instead of using Wi-Fi.

Your AirPlay connection might get interrupted when you lock your device, put it to sleep, or switch to a different app.

If you still can't use AirPlay after trying these steps, contact Apple Support.

*HomePod isn't available in all countries and regions.